Table of Contents
Advertisement
6.1 Voice play
(1)Press "
" button to select required folder.
(2)Press "
" or "
" button to select the file to play.
(3)Press "MENU" key to select the icon of the file list, press
"PLAY" button to confirm access to the file list browsing;
press the "+" or "-" button to select the file to play, press
"PLAY" button to confirm.
(4)Press "PLAY" button to start play, and the recorder's
indicator will turn green.
(5)Use "+" or "-" button to adjust the volume.
(6)Press "STOP" button to end the play. In STOP mode, press
"MENU" button to select the file list icon, then press
"
" or "
" to select the menu icon, and press "PLAY"
to confirm entering the menu list.
(7)In STOP mode, press "STOP" button to display file
information such as file name, sampling rate and file size.
(8)During the play, press the PLAY button to pause, press the
PLAY button again to resume the play.
(9)Press "
" or "
forward the current file.
46
EN
" button to quickly play backward or
Reminder
• When the earphone is inserted into the hole, the record-
er speaker will stop working.
6.2 File editing
In the process of playing the recorded file, short press the
MENU button to switch the editing function and confirm the
selection by pressing PLAY button. Function icons of Append,
Insert, Divide and Cut are displayed in turn on the informa-
tion icon.
Reminder
• In the absence of any action, this function will be auto-
matically cancelled after 8 seconds.
(1)Append: Insert a recording clip at the end of a file.
(2)Insert: Insert a recording clip between the current playback
points of a file.
(3)Divide: Divide a file from the current playback point into
two files.
(4)Cut: Press the "FOCUS" button to set the start point,
press the "PLAY" button to confirm the end point, and cut
out the middle section of the start point and end point of
Advertisement
Chapters
Table of Contents
