Clarion XA311 Owner's Manual page 2

2. CONTROLS / COMMANDES / CONTROLES
Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.
Remarque:
Veuillez déployer cette page et vous référer aux schémas quand vous lisez chaque chapitre.
Nota:
Cuando lea los capítulos, despliegue esta página y consulte los diagramas.
SOURCE UNIT / APPAREIL PILOTE / UNIDAD FUENTE
Cassette Insertion Slot
1 2 3 4 5 6 7 8 9 Fente d'insertion de la cassette
Ranura de inserción de casete
(
* & ¥ % $ #
DISPLAY / AFFICHEUR / VISUALIZADOR
3
XA311
3. CASSETTE PRECAUTIONS AND CARE
1. Tape slack can lead to operating difficulties.
Remove tape slack before inserting a cas-
sette, particularly when using C-90 or prere-
corded cassettes.
2. Use C-30 to C-90 cassettes. Avoid using
C-120 or longer cassettes (The very thin tape
may stretch or break).
0 ! @
3. Clean the head periodically with a good com-
mercial head cleaner. Avoid touching the
head with magnetic or hard objects.
4
XA311
4. Do not oil the cassette mechanism.
5. Always remove the cassette from the mecha-
nism when not in use. Exposure to direct sun-
light, extreme temperatures or high humidity
may damage cassettes.
33
XA311