Display Codes; Troubleshooting - Mec SMART Series Manual

SMART SERIES
Clay Target Machine Electrics
CODE/COUNTERS
UNSAFE/LOADED
LIFETIME COUNTER
RESETTABLE COUNTER
BATTERY VOLTAGE
Firmware Version
*NEVER USE THE SELECTOR WHEN MACHINE IS ARMED.
CODES
FAULT1
FAULT2
FAULT7
4

DISPLAY CODES

Machine is armed.
(Push to view counter number) Displays machines life cycle target
count. This also includes every time the machine is fired when a clay
target is not launched.
Used to track usage over specific times. To reset, press and hold
selector button until the screen zeros out. Dash indicates resettable
screen.
(Push until voltage displays) Displays the current voltage of the
battery.
Displays the current Smart Electrics Firmware Version.
TROUBLE SHOOTING
PROBLEM
Motor overload, becomes a
hard fault after third attempt to
recover. (Locked Gear Box)
Arm lever is cocked, but limit
switch is closed. (Mechanical
Fault)
Brake's FET is experiencing a
short between gate and source.
800-797-4632 . mecoutdoors.com
DESCRIPTION
SOLUTION
Replace the motor/gearbox.
Replace the limit switch.
Disconnect power, wait 5 seconds
or longer and then reconnect.