Specifications - Makita DTD134 Instruction Manual

ENGLISH (Original instructions)
1-1. Red indicator
1-2. Button
1-3. Battery cartridge
2-1. Star mark
3-1. Switch trigger
4-1. Lamp
5-1. Reversing switch lever
6-1. Button
6-2. LED indicator

SPECIFICATIONS

Capacities
No load speed (min
Impacts per minute
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
Noise
The typical A-weighted noise level determined according
to EN60745:
Model DTD134
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
Model DTD146
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
Wear ear protection
Explanation of general view
8-1. Bit
8-2. Sleeve
9-1. Bit-piece
9-2. Bit
10-1. Hook
10-2. Screw
12-1. Limit mark
13-1. Screws
13-2. Rear cover
Model
Machine screw
Standard bolt
High tensile bolt
-1
)
Overall length
Net weight
Rated voltage
) : 92 dB (A)
pA
) : 103 dB (A)
WA
) : 93 dB (A)
pA
) : 104 dB (A)
WA
DTD134
0 - 2,400
1.2 kg (with battery
BL1415/BL1415N)
1.4 kg (with battery
BL1430/BL1440)
D.C.14.4 V
ENE033-1
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
ENG905-1
Model DTD134
Work mode : impact tightening of fasteners of the
maximum capacity of the tool
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model DTD146
Work mode : impact tightening of fasteners of the
maximum capacity of the tool
Vibration emission (a
Uncertainty (K) : 2.0 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
4
14-1. Spring
14-2. Arm
14-3. Recessed part
15-1. Carbon brush cap
16-1. Lead wire
16-2. Carbon brush cap
17-1. Hole
17-2. Carbon brush cap
DTD146
4 mm - 8 mm
5 mm - 14 mm
5 mm - 12 mm
0 - 2,300
0 - 3,200
138 mm
1.3 kg (with battery
BL1815/BL1815N/BL1820)
1.5 kg (with battery
BL1830/BL1840/BL1850)
D.C.18 V
2
) : 12.0 m/s
h
2
2
) : 15.5 m/s
h
2
ENG900-1
ENG901-1