Storage; Troubleshooting; Disposal - Silvercrest SMWS 1000 A1 Operating Instructions Manual

Storage

■ After it has cooled down, store the cleaned appliance in a dust­free and
dry location .

Troubleshooting

Fault
The appli­
ance is not
working .
If the malfunction cannot be corrected using one of the suggestions above, or
if you have found some other kind of malfunction, please contact our Customer
Service department .

Disposal

Never dispose of the appliance in your normal domestic waste .
This product is subject to the provisions of European Directive
2012/19/EU .
Dispose of the appliance via an approved disposal company or your municipal
waste facility . Please comply with all applicable regulations . Please contact your
waste disposal facility if you are in any doubt .
Your local community or municipal authorities can provide information on how
to dispose of the worn­out product .
The packaging materials have been selected for their environmental friendliness
and ease of disposal and are therefore recyclable . Dispose of packaging materi­
als that are no longer needed in accordance with applicable local regulations .
Dispose of the packaging in an environmentally friendly manner .
Note the labelling on the packaging and separate the packaging material com­
ponents for disposal if necessary . The packaging material is labelled with abbre­
viations (a) and numbers (b) with the following meanings: 1–7: Plastics,
20–22: Paper and cardboard, 80–98: Composites .
■ 54 │ GB │ MT
Cause
The mains cable 3 is not
properly connected to the
appliance .
The plug 3 is not connected
to the power supply .
The mains power socket is
defective .
The appliance is defective .
Solution
Plug the mains cable 3 correctly
into the hotplate 1 .
Insert the plug 3 into a wall
socket .
Use a different mains power
socket .
Contact the Customer Service
department .
SMWS 1000 A1