Valcom T7C Series Manual page 19

Zeroing of the
measure. It must
be executed in
accordance with
all those specified
Starting
the Process
Alignment of the
measure with the
real value of
consistency.
Take a pulp sample to provide the
laboratory and enter the menu "init
setup -> Freeze" confirming the
acquisition of the sample, appear "***"
flashing on the display
Put in the real value
of consistency on the
%CONST menu
VALCOM® - www.valcom.it - valcom@terranova-instruments.com
a TERRANOVA® Srl brand - www.terranova-instruments.com
Factory & Sales: Via Gramsci, 1 – 26827 Terranova Passerini (LO) - Italy
Legal Office: Via Rosso Medardo, 16 – 20159 Milano (MI) - Italy
TRASMETTITORE ELETTRONICO DI CONSISTENZA SMART
ELECTRONIC CONSISTENCY TRANSMITTER SMART
Sistema Gestione Qualità, Ambiente e Sicurezza
Quality Management System, Environment and Safety
INIT SETUP
MOUNT
in point 2.
%CONSIST
dough
CALIBRAT
(facoltativo)
Linearization of the
measure curve through
the insertion of
calibration point, which
are obtained by real
consistency value of the
sample taken on-line
INSERTION OF
POINT
Take a pulp sample and at the
same time write the value read
from display
Consistency value
read from display:
%CS_READ
Point of calibration
Pi (%CS_READ, %CS_CALIBR)
MOD. MN
Ph: +39 0377 911066 – Fax: +39 0377 919156
VAT IT07848810151
MNT7C01
Rev. 19.01
Issued
Consistency value
of the sample:
%CS_CALIBR
Rev. 0
DC
by:
Pag. 19