HAMPTON BAY PG139HDS Use And Care Manual page 11

Assembly (continued)
9
Assembling the KD Domes
with the Top Dome
□ Assemble the four KD Domes (B) by using four M5
x 8 mm Bolts (FF), M5 Nuts (GG) and 5 mm
Washers (HH). Attach the Top Dome (A) to the
assembled KD Domes (B) by using eight M5 x 8
mm Bolts (FF), M5 Nuts (GG) and 5 mm Washers
(HH).
B
GG
HH
FF
A
M5 X 8 mm Bolt
FF
M5 Nut
GG
5 mm Washer
HH
GG
HH
FF
X 12
X 12
X 12
11
10
Assembling the Heat
Insulation Plate and Dome
□ Attach the Heat Insulation Plate (E) onto the bracket
of the Burner Assembly (C); then attach the
Assembled KD Domes (B) with the Top Dome (A) to
the Burner Assembly (C), by using three M5 Nuts
(GG) and 5 mm Washers (HH).
A
B
E
C
M5 Nut
GG
HH
5 mm Washer
Please contact 855-HD-HAMPTON for further assistance.
GG
HH
X 3
X 3
HAMPTONBAY.COM