Table of Contents
Advertisement
III. CMOS SETUP UTILITY
by:
- Auto
- Manual
Reset Configuration Data
Reset Configuration
Data:
- Enabled
- Disabled
IRQ3, IRQ4, IRQ5, IRQ7, IRQ9, IRQ10, IRQ11, IRQ12, IRQ14,
IRQ15
IRQ 3-5, 7, 9-12,
14-15:
Legacy ISA
PCI/ISA PnP
automatically for these PNP/PCI and onboard devices.
The exception might be encountered when legacy ISA
devices are installed, which occupies resources that
BIOS can not know. Therefore, this option is for BIOS
to know in advance that IRQ/DMA is occupied by
legacy ISA devices if Manual is selected.
When this item is set to Enabled, BIOS will turn it
Disabled again in the next boot up. This item is for
clearing ESCD data. The only reason to clear is the
data loosing the confidence. The engineering test is a
good reason to change the default setting.
Set the selected IRQ to Legacy ISA if your ISA card is
not PnP compatible card and requires a special IRQ to
make it function.
These options provide IRQ resources allocation for
Legacy ISA or PCI/ISA PnP card.
Default: IRQ 3~4 => Legacy ISA
Default: Manual
Default: Disabled
Others =>PCI/ISA PnP
3-21
Advertisement
Table of Contents
