Intel BX User Manual page 42

III. CMOS SETUP UTILITY
- 8 Min
- 12 Min
- 20 Min
- 30 Min
- 40 Min
- 1 Hour
 Suspend Mode
Suspend Mode:
- Disabled
- 1 Min
- 2 Min
- 4 Min
- 8 Min
- 12 Min
- 20 Min
- 30 Min
- 40 Min
- 1 Hour
HDD Power Down

HDD Power Down:
- Disabled
- 1 Min
- .....
- 15 Min
3-16
detected by monitoring the IRQ signals or other I/O
events.
This item lets you set the time after which the system
enters into Suspend mode from Standby mode. The
system activity is detected by monitoring the IRQ
signals or other I/O events.
This item allows you specify the IDE HDD idle time
before the device enters the power down state. This
item is independent from the power states, Standby
and Suspend Mode.
Default: Disabled
Default: Disabled
Default: Disabled