Table of Contents
Advertisement
III. CMOS SETUP UTILITY
hardware. If you change the values, you may introduce fatal errors or recurring
instability into your system.
SDRAM CAS Latency
SDRAM CAS
Latency:
- 2T
- 3T
- Auto
SDRAM RAS# to CAS# Delay
SDRAM RAS# to
CAS# Delay:
- 2T
- 3T
- Auto
3-10
This item defines the latency between SDRAM read
command and the actual data time.
It is an important SDRAM parameter. If your SDRAM
has unstable problem, try set this item to 3T.
This item defines the latency between SDRAM active
command and the read/write command.
It is an important SDRAM parameter. If your SDRAM
has unstable problem, try set this item to 3T.
Default: 3T
Default: 3T
Advertisement
Table of Contents
