Cautions In Usage - Pioneer BDR-XD08UMB-S Owner's Manual

Cautions in Usage

• Do not use in dusty locations, or in locations with high temperature or humidity.
• Do not subject the device to vibration or shock.
• During operation, do not move or pick up the device.
• Beware of condensation. If there is condensation, leave the device for one to two hours for the
moisture to evaporate before use.
• Do not inspect or modify the interior of the device.
• Use a soft, dry cloth to wipe any soiling from the exterior of the device. In the case of significant
soiling, dilute a neutral cleaner five to six times in water and use this to moisten a soft cloth,
wipe the soiling away, then dry with a dry cloth. Do not use volatile chemicals including benzene,
thinners, alcohol, or aerosol sprays, as these may damage the surface. Before using chemically
treated cloth intended for the care of electronics, carefully read the cautions included with the
cloths.
• There are no guarantees regarding data if data is lost while using this device. Ensure you make
regular backups of your data for recovery in the case of malfunctions.
Handling discs
• Do not touch or scratch the signal (shiny) side of the disc.
• Hold the disc either by both edges, or by the center hole and one
edge.
• Do not apply stickers or labels to the disc.
• Do not use cracked or significantly warped discs. Doing so may lead
to a malfunction in the device.
• When using old or rental discs, check that there are no cracks
around the center hole. Centrifugal force from high-speed rotation
may enlarge these cracks, causing the disc to break.
• Do not use discs with special shapes (heart-shaped, hexagonal,
etc.) or other non-standard discs. Doing so may lead to a
malfunction.
BDR-XD08UMB-S
11
En