Security; General Information; Exposure To Rf Energy; Efficient Modem Operation - FALCOM I56 Hardware Description

I65/I56I HARDWARE DESCRIPTION

1 Security

IMPORTANT FOR THE EFFICIENT AND SAFE OPERATION OF
YOUR GSM MODEM, READ THIS INFORMATION BEFORE USE!
Your cellular engine I56/I56i is one of the most exciting and innovative
electronic products ever developed. With it you can stay in contact with
your office, your home, emergency services and others, wherever service is
provided.
This chapter contains important information for the safe and reliable use of
the I56/I56i. Please read this chapter carefully before starting to use the
cellular engine I56/I56i.

1.1 General information

Your I56/I56i modem utilises the GSM standard for cellular technology.
GSM is a newer radio frequency („RF") technology than the current FM
technology that has been used for radio communications for decades. The
GSM standard has been established for use in the European community and
elsewhere.
Your modem is actually a low power radio transmitter and receiver. It sends
out and receives radio frequency energy. When you use your modem, the
cellular system handling your calls controls both the radio frequency and the
power level of your cellular modem.

1.2 Exposure to RF energy

There has been some public concern about possible health effects of using
GSM modem. Although research on health effects from RF energy has
focused for many years on the current RF technology, scientists have begun
research regarding newer radio technologies, such as GSM. After existing
research had been reviewed, and after compliance to all applicable safety
standards had been tested, it has been concluded that the product is fit for
use.
If you are concerned about exposure to RF energy there are things you can
do to minimise exposure. Obviously, limiting the duration of your calls will
reduce your exposure to RF energy. In addition, you can reduce RF
exposure by operating your cellular modem efficiently by following the
guidelines below.

1.3 Efficient modem operation

In order to operate your modem at the lowest power level, consistent with
satisfactory call quality please take note of the following hints.
If your modem has an extendible antenna, extend it fully. Some models
allow you to place a call with the antenna retracted. However, your
modem operates more efficiently with the antenna fully extended.
Do not hold the antenna when the modem is „IN USE". Holding the
antenna affects call quality and may cause the modem to operate at a
higher power level than needed.
This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission.
VERSION 1.00
Page 10