Table of Contents
Advertisement
Warning Messages
When one of the problems described below is detected by
the unit, a warning mark appears on the status bar of the
web menu. Operation can continue even when the warning
mark appears. When multiple errors occur simultaneously,
1)
Code
Display
810100
ENC REF UNLOCKED
810200
LOST LOCK
910100
SYS-APP SHARED MEM ACCESS FAIL
920200
SYS1 INTERNAL COMMUNICATION FAILED
920300
NEW SETUP MENU CREATED
A101pp
PORT x NO AV INPUT
A201pp
PORT x VIDEO DATA ERROR
A301ls
MDC CONDITION1 DOUBTFUL
A302ls
MDC CONDITION1 BAD
A303ls
MDC CONDITION2 DOUBTFUL
A304ls
MDC CONDITION2 BAD
A305ls
MDC CONDITION3 DOUBTFUL
A306ls
MDC CONDITION3 BAD
A307ls
MDC AV READ ERROR2
A60100
UNFORMATTED MEMORY BOARD DETECTION
B101ls
MDC FULL, NOT RECORDABLE
B102ls
MDC COND3 BAD, NOT RECORDABLE
B103ls
MDC FUNCTION LIMIT
B104ls
MDC MAXIMUM FILES, NOT RECORDABLE
B105ls
MDC FILE SYSTEM INFO FULL, NOT RECORDABLE
B106pp
PORT x STOP RECORDING, MDC FULL
C10100
EXPORT FILE TRANSFER ERROR 1
C10200
EXPORT FILE TRANSFER ERROR 2
C10300
EXPORT FILE TRANSFER ERROR 3
C10400
NETWORK WRITE ERROR
C10500
USB STORAGE DISK FULL
C20100
FAIL TO MOUNT USB STORAGE
C20200
USB STORAGE LOW CAPACITY
C30100
LOGIN FAIL TO NETWORK SERVER
the number of errors is indicated to the right of the warning
mark.
After a warning message appears, resolve the cause of the
warning based on the message.
Description
The lock state of the ENC board is unstable.
Synchronization signal of the ENC board was interrupted during
playback or recording.
Access privilege for accessing APP shared memory could not be
obtained within a set time.
SYS1 internal communication process failed.
New menu data was created because menu data was not
detected.
Video and audio input signal could not be detected on port x of
the ENC board.
Video data error occurred on the replay port.
The number of errors when writing/reading internal memory is
becoming large.
The number of errors when writing/reading internal memory is
extremely large.
The number of internal memory repetitive operations is
becoming large.
The number of internal memory repetitive operations is
extremely large.
The swap space used to replace bad memory cells in internal
memory is becoming smaller.
The swap space used to replace bad memory cells in internal
memory has been exhausted.
A video/audio playback error caused by an internal memory
problem was detected.
An unformatted internal memory board was detected.
Recording was canceled because the remaining recording
space in internal memory has been exhausted.
Recording was canceled because the swap space used to
replace bad memory cells in internal memory has been
exhausted.
The recording/playback operation was canceled due to internal
memory function limits related to recording and playback.
Recording was canceled because the maximum number of files
that can be recorded in internal memory was reached.
Recording to internal memory was canceled because recording
reached the memory management information upper limit.
Recording was stopped because the internal memory is full.
An error occurred during recorded file transfer. (Initialization
process)
An error occurred during recorded file transfer. (BANK->WRAP)
An error occurred during recorded file transfer. (WRAP->export)
Could not write to network destination session during recorded
file transfer.
USB external storage is full.
Failed to mount USB external storage.
The remaining capacity on USB external storage fell below
threshold value.
Cannot log in to NAS external storage.
33
Advertisement
Table of Contents
