QUICK START GUIDE
Phone Pairing
There are three ways to pair the phone.
Initially Pairing the X1S
The Bluetooth system will automatically enter the phone
pairing mode when you initially turn on the Bluetooth
system or in the following situations:
• Rebooting after executing Factory Reset; or
• Rebooting after executing Delete All Pairings.
=
Alternating blue and red flashing lights indicate the
=
device is now discoverable. With your mobile phone
in Bluetooth-pairing mode, select Sena X1S in the list
LED
of devices detected.
STATUS
=
PIN
NUMBER
Note:
• The phone pairing mode lasts for 3 minutes.
• To cancel phone pairing, tap the Center Button.
HOLD
1s