Table of Contents
Advertisement
9. A
LARMS
The alarms page allows the user to view all active alarms. From the home page,
should an alarm/error occur, the red banner will appear similar to the figure below.
Active error information is described in the banner at the bottom of every page and in
the alarm page itself.
Potentially common active errors/alarms include (not limited to):
1) Output Power Error- This error occurs if one or more outputs experiences an issue.
2) Low Liquid Error- This error occurs if the liquid level in the unit does not meet
minimum requirements.
3) Temperature Watchdog Error- This error occurs if the liquid temperature in the unit
does increases too quickly.
4) Over-temp Error- This error occurs if the maximum temperature is met or exceeded.
17
Property of Ultrasonic Power Corporation - © 2019
Publication # 190610
Advertisement
Table of Contents
