Setup - Ultrasonic Sonic Touch II User Manual

8. S
ETUP
The setup page allows the user to adjust basic settings of the HMI such as
temperature units (Fahrenheit and Celsius), temperature offset, hysteresis, brightness,
date and time. This is an alternate location to calibrate touch.
'DI Water Mode' may be toggled on in order to disable low liquid level protection for the
usage of high quality DI water. This mode is only for usage if the system is otherwise
incapable of running due to an inability for the equipped sensor to detect this DI water.
If you wish to maintain low liquid level protection* whilst using high quality DI water
please contact your UPC representative for alternative liquid detection options.
*Low Liquid Detection apparatus may be subject to erosion in harsh environments
16
Property of Ultrasonic Power Corporation - © 2019
Publication # 190610