Sony 6L Installation Information page 6

Never install the TV as shown below:
Note
• If you intend to route the cables in the wall, make a hole in the wall to insert the cables before beginning the installation.
3
Remove the screws from the rear of the TV.
4
Attach the screws
parallel with the wall).
Note
• If using an electric screwdriver, set the torque at approximately 1.5 N·m {15 kgf·cm}.
• Be sure to fasten the pulleys when attaching them to the TV.
6 (GB)
Air circulation is blocked.
and pulleys to the rear of the TV (to make it
Wall
M8L25
PL