Table of Contents
Advertisement
Quick Links
User Manual
Thank you for purchasing our product. If there are any
questions, or requests, do not hesitate to contact the
dealer.
This manual applies to the models below:
Type
This manual may contain several technical incorrect
places or printing errors, and the content is subject to
change without notice. The updates will be added to
the new version of this manual. We will readily improve
or update the products or procedures described in the
manual.
2 MP Series Audio PT
I
II
Turret Camera
User Manual
DS-2CE70DF3T-PTS
DS-2CE70D0T-LPTS
01000020220421
Model
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for HIKVISION DS-2CE70DF3T-PTS
Summary of Contents for HIKVISION DS-2CE70DF3T-PTS
- Page 1 This manual applies to the models below: Type Model DS-2CE70DF3T-PTS DS-2CE70D0T-LPTS This manual may contain several technical incorrect places or printing errors, and the content is subject to change without notice. The updates will be added to the new version of this manual.
- Page 2 With the philosophy of “Technology for the Good”, Hikvision requests that every end user of video technology and video products shall comply with all the applicable laws and regulations, as well as ethical customs, aiming to jointly create a better community.
- Page 3 where video products connected, establishing and constantly optimizing network security. Video products have made great contributions to the improvement of social security around the world, and we believe that these products will also play an active role in more aspects of social life. Any abuse of video products in violation of human rights or leading to criminal activities are contrary to the original intent of technological innovation and product development.
-
Page 4: Regulatory Information
Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. - Page 5 Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into “Warnings” and “Cautions”. Warnings: Serious injury or death may occur if any of the warnings are neglected.
-
Page 6: Main Features
The sensor may be burned out by a laser beam, so when any laser equipment is in using, make sure that the surface of sensor will not be exposed to the laser beam. Do not expose the device to high electromagnetic ... -
Page 7: Installation
2 Installation Before you start: Make sure that the device in the package is in good condition and all the assembly parts are included. Make sure that all the related equipment is power-off during the installation. Check the specification of the products for the ... - Page 8 Figure 2-3 2-Axis Adjustment NOTE: DO NOT adjust the angle of the main body or enclosure manually. Adjust the pan and tilt angle through the DVR menu or Hik-Connect.
-
Page 9: Menu Description
3 Menu Description Please follow the steps below to call the menu. NOTE: The menu description part is for your reference only. It might have some differences due to the specific model that you have. Steps: 1. Connect the camera with the TVI DVR, and the monitor, shown as the figure 3-1. - Page 10 VIDEO FORMAT EXPOSURE MODE *SLOW SHUTTER *ANTI-BANDING BACK EXPOSURE EXIT SAVE&EXIT LIGHTNING MODE *LIGHTNING BACK SETTINGS EXIT SAVE & EXIT LIGHT THRESHOLD LEVEL *SMART MODE LIGHT BACK EXIT SAVE & EXIT IMAGE MODE WHITE BALANCE BRIGHTNESS CONTRAST MAIN MENU SHARPNESS VIDEO SATURATION SETTINGS...
-
Page 11: Video Format
3.1 VIDEO FORMAT You can select the video format as 2 MP @ 25 fps or 2 MP @ 30 fps. You can also select PAL, or NTSC in CVBS mode. 3.2 EXPOSURE EXPOSURE MODE You can set the EXPOSURE MODE to GLOBAL, BLC, HLC, WDR (supported by Type I camera), DWDR (supported by Type II camera), or HLS (supported by Type I camera). - Page 12 ANTI-BANDING ANTI-BANDING is to prevent the phenomenon of horizontal lines (banding) when photographing images in low frequency light or high brightness environments. Note: ANTI-BANDING is only supported by Type I camera. 3.3 LIGHTNING SETTINGS Note: LIGHTNING SETTINGS is only supported by Type II camera.
-
Page 13: Video Settings
The white light is always off except when alarm is set and triggered. 3.4 SMART LIGHT Note: SMART LIGHT is only supported by Type I camera. LIGHT SMART LIGHT is used to control the integrated white light and avoid overexposure when the light is on. You can set the light as AUTO or OFF. -
Page 14: Factory Default
CONTRAST This feature enhances the difference in color and light between parts of an image. You can set the CONTRAST value from 1 to 9. SHARPNESS Sharpness determines the amount of detail an imaging system can reproduce. You can set the SHARPNESS value from 1 to 9. -
Page 15: Save And Exit
3.10 SAVE & EXIT Move the cursor to SAVE & EXIT and click Iris+ to save the settings, and exit the menu. UD28106B-A...
Need help?
Do you have a question about the DS-2CE70DF3T-PTS and is the answer not in the manual?
Questions and answers