Far Tools CBG 150/200 Manual page 16

Sharpening and grinding
02
To sharpen or grind blades (knives, scissors, pruning shears etc.), use the water grinding-
wheel with fine grain (ex A120). Fill the water trough and ensure the presence of a perma-
nent film of water on the grinding wheel. Empty the water after each use.
-
03
-
-
04
-
-
05
-
Settings of the machine
FIG. F
Toolholder and spark shield adjustment
01
Replacing consumables
FIG. G
Grinding-wheel
01
Water grinding wheel
02
Cleaning and maintenance
The use of suitable accessories in good condition will ensure the machine operates optimally
01
Check the condition of your grinding-wheels regularly.
Use a grinding-wheel dresser regularly to rectify the grinding-wheel surface.
02
Always keep the equipment clean.
03
Always check grinding-wheel condition (including new grinding-wheels).
04
Do not exert too much pressure on the grinding-wheels, brushes and other accessories in
05
order not to overtax the motor needlessly.
110235-Manuel-G.indd 16
-
03
-
04
EN
-
05
-
06
21/09/10 10:59:11