EsiWelma Sensigas URS40SI Quick Start Manual

Use

Operation

Ordering

05/10/2020
Sensigas
Oxygen detectors
IP65 protection rating
11...14Vdc power supply.
Electrochemical cell sensor designed for the detection of oxygen (O
Up to three alarm thresholds plus sensing element fail.
LED on sensing element body to indicate operating status.
Automatic countdown of sensor life.
The URS40SI detectors are used to detect oxygen excess or deficiency in non-classified
areas.
An oxygen excess forms if it leaks in hospitals, laboratories, welding centres and, more
in general, where oxygen is stored.
Oxygen deficiency is an indirect measurement of the presence of other explosive or
asphyxiant gases that deplete the oxygen in the air.
URS40SI detectors transmit data from a local bus connected with their Control Unit,
which acts as the master unit of the gas detection system.
If there is an oxygen leak or an absence of oxygen, the detector compares the measured
concentration value with the threshold limit setpoints and energizes the system relays
if associate.
Alarm information is transmitted to the Control Unit, which energizes its own internal
relay module (MR0) and the remote Relay and Display modules depending on the
associations.
To order, simply state the part number: URS40SI.
For special versions, on request, please contact Customer Service.
EW0526A2_en - rev. A
Gas detection systems for industrial environments
®
URS40SI
).
2
Oxygen detectors – URS40SI
1/4