How To Replace: Lamp; Troubleshooting; What To Do If - Electrolux EO90MNK1 User Manual

Install the shelf supports in the opposite sequence.

11.3 How to replace: Lamp

WARNING!
Risk of electric shock.
The lamp can be hot.
Always hold the halogen lamp with a cloth to prevent grease residue from burning on the lamp.
Step 1
Turn off the oven. Wait until
the oven is cold.
Top lamp
Step 1 Turn the glass cover to remove it.
Step 2 Clean the glass cover.
Step 3 Replace the lamp with a suitable 300 °C heat-resistant lamp.
Step 4 Install the glass cover.

12. TROUBLESHOOTING

WARNING!
Refer to Safety chapters.

12.1 What to do if...

The appliance does not turn on or does not heat up
Possible cause
The appliance is not connected to an electrical
supply or it is connected incorrectly.
Before you replace the lamp:
Step 2
Disconnect the oven from the
mains.
Check if the appliance is correctly connected to
the electrical supply.
TROUBLESHOOTING
Put a cloth on the bottom of
the cavity.
Remedy
Step 3
63/172