Reconnecting The Smart Touch Control - Samsung SEK-1000 Manual

Recovering a Previous State
Turn off the TV and then disconnect the TV power plug.
1.
2. Detach the Evolution Kit from the TV.
3. Turn on the TV, navigate to Software Update (Support > Software Update), and then update the software.
Update the software via the Internet. Otherwise, you will not be able to update via USB or play DRM-protected
✎
videos.

Reconnecting the Smart Touch Control

If the Smart Touch Control stops operating or works abnormally, replace
the battery as this may be caused by insufficient battery power. If the
problem persists, press the PAIRING button on the Smart Touch Control
to restore pairing with the TV. The PAIRING button cannot be accessed
without removing the Smart Touch Control's battery cover. Within a
distance between 1ft to 13.1ft(30cm to 4m), point the Smart Touch
Control to the TV receiver and press the PAIRING button. When pairing is
complete, the pairing image displays at the bottom left of the TV screen.
<The Smart Touch Control's pairing button>
English-9