Table of Contents
Advertisement
D. Reverse polarity connec-
tion has caused charger to
have no output
E. High voltage measured
across charger output termi-
nals
Factory Contact Information
If a problem with your charger persists after you have applied the above-outlined solutions,
or if you have any questions about the installation and proper operation of your charger,
please contact NEWMAR's Technical Services Manager:
Phone: 714-751-0488 — From the hours of 7:00 A.M. to 4:30 P.M. weekdays, P.S.T.
Fax: 714-957-1621 — Anytime
E-Mail: techservice@newmarpower.com — Anytime
We will be happy to consult with you to resolve any problem you may have. If it appears the
charger must be returned to the factory for repair we will issue a Return Materials Authori-
zation at that time.
14
U.S.A. HEADQUARTERS
P.O. Box 1306, Newport Beach, CA 92663
Phone: 714-751-0488 Fax: 714-957-1621
E-Mail: sales@newmarpower.com
d.c. output fuse and other
internal components likely
blown
Batteries not connected to
charger. It is normal to read
1/2 volt higher across any
output bank when no batter-
ies are connected.
E
P
P
LECTRONIC
OWER
C
! ! ! ! !
N
OMMUNICATION
AVIGATION
www.newmarpower.com
Replace output fuse with
like type and value. If still
no output, return to servic-
ing dealer for failure analy-
sis or contact NEWMAR for
Return Authorization Num-
ber
Check for tight connection
of charging leads to batter-
ies
RODUCTS
Phone:+31-35-603-2494
EURO WAREHOUSE
Fax:+31-35-603-2149
Advertisement
Table of Contents
