Change Language - DEEPELEC DeepVNA 101 Manual

HANGZHOU MINGHONG ELECTRONIC TECHNOLOGY CO., LTD.
Add call sign display
1) Connect your DeepVNA 101 to a PC's USB port using Type-C USB socket
on the device. Press the selector switch and keep it down, while powering
up the device. The LCD displays the following prompt, indicating that the
boot-loader is active.
2) Then at PC side, the device will act as a disk drive, which should appear
in File Explorer. Copy your callsign.txt into the root directory of that disk,
then re-power the device.
Use PC software and install drivers
http://deepelec.com/files/en.stsw-stm32102.zip
Install the appropriate 32 or 64bit driver. Turn ON the nano, attach to any USB
port, and wait for the computer to give the "Installing driver" message. Wait
until it completes.
We haven't released official PC software at this time, we recommend using
nanovna-saver(by Rune B. Broberg), a powerful NanoVNA PC software.
https://github.com/mihtjel/nanovna-saver
杭州冥鸿电子科技有限公司 www.deepelec.com

Change Language

If you received DeepVNA 101 with or switched to Chinese language.
1) You can follow these steps as figure to change the language to English.
设置→语言→英文
- 11 -