Table of Contents
Advertisement
Special notes on LCD display
The following are normal aspects of the LCD display and do not indicate a problem.
• Due to the nature of the fluorescent light, the screen may flicker during initial
use. Turn off the power switch and then turn it on again to make sure the flicker
disappears.
• You may find slightly uneven brightness on the screen depending on the
desktop pattern you use.
• The LCD screen has 99.99% or more effective pixels. It may include blemishes of
0.01% or less such as a missing pixel or a pixel that remains lit all the time.
• Due to the nature of the LCD screen, an afterimage of the previous screen may
remain after switching the image, when the same image is displayed for hours.
In this case, the screen is recovered slowly by changing the image or turning off
the power switch for a few hours.
Information for your safety and comfort
Safety instructions
Read these instructions carefully. Keep this document for future reference.
Follow all warnings and instructions marked on the product.
Cleaning your display
Please carefully follow these guidelines when cleaning the display:
• Always unplug the display before cleaning.
• Use a soft cloth to wipe the screen and cabinet front and sides.
Connecting/disconnecting the device
Observe the following guidelines when connecting and disconnecting power from
the LCD display:
• Make sure the display is attached to its base before connecting the power cord
to the AC power outlet.
• Make sure both the LCD display and the computer are turned off before
connecting any cable or unplugging the power cord.
• If the system has multiple sources of power, disconnect power from the system
by unplugging all power cords from the power supplies.
Advertisement
Table of Contents
