Installation; Safety - Trane ComfortLink II XL 1040 Installation & User Manual

Installation

Safety

⚠ WARNING ⚠
This information is intended for
use by individuals possessing
adequate backgrounds of electrical
and mechanical experience. Any
attempt to repair a central air
conditioning product may result
in personal injury and/or property
damage. The manufacturer or
seller cannot be responsible for the
interpretation of this information,
nor can it assume any liability in
connection with its use.
page 13 page 13
NOTE: Use 18-gauge color-coded
thermostat cable for proper wiring.
Shielded cable is not typically
required. Keep this wiring at least
one foot away from large inductive
loads such as electronic air cleaners,
motors, line starters, lighting
ballasts and large distribution
panels.
Failure to follow these wiring
practices may introduce electrical
interference (noise) which can
cause erratic system operation.
All unused thermostat wire to be
grounded at indoor unit chassis
ground only. Shielded cable may
be required if the above wiring
guidelines cannot be met. Ground
only one end of the shield to the
system chassis.
⚠ WARNING ⚠
LIVE ELECTRICAL COMPONENTS!
During installation, testing,
servicing, and troubleshooting of
this product, it may be necessary
to work with live electrical
components. Failure to follow
all electrical safety precautions
when exposed to live electrical
components could result in death
or serious injury.
TZON1040 Installation and User Guide