30
5. Troubleshooting
Description
The Plug and Play receiver does
not turn on.
The LCD displays, "Check
antenna".
Reception is marred by audio static
or loss of clarity.
There's no signal on the Plug and
Play receiver's display.
User's Guide
Probable Cause
The power cable may not be
properly connected.
The fuse may be blown.
The satellite antenna is not
connected.
The antenna or its cable is faulty.
The FM frequency contains static. Switch to another FM frequency.
The vehicle's antenna is not
connected to the radio.
Check for obstacles over or around
the antenna.
Remedy
Check power cable and fuse.
Check the antenna connection to
the Plug and Play receiver.
Contact the system installer or
vendor.
Check the vehicle antenna cable.
Change your location to eliminate
nearby obstacles, such as bridges
and tall buildings.