Table of Contents
Advertisement
Insignia NS-D7PDVD Dual-Screen Portable DVD Player
Using your player
Playing a DVD or audio CD
Note
To play a disc:
1 Make sure that your player is connected to power.
2 Slide the ON/OFF switch to the ON position.
3 Press the OPEN knob. The disc tray opens. For the location of the
OPEN knob, see "DVD player" on page 5.
4 Place a disc, label side up, in the disc tray, then close the tray. The disc
starts playing automatically.
Controlling DVD or audio CD playback
To control disc playback:
•
•
•
•
•
•
•
Most DVDs and your player have region codes that help control
illegal distribution of DVDs. The region code for your player is 1.
You can only play DVDs with a region code of 1 or ALL. The
region code for a DVD is printed on the DVD or the DVD
packaging.
Press
(STOP) once to stop playback. Your player remembers
where you stopped. If you press
at the point where you stopped.
Press
(STOP) twice to stop playback. If you press
player starts playing at the beginning of the disc.
Note
When playing an audio CD, press STOP once to stop
playback and return the player to the beginning of
the CD.
Press
to pause playback. Press this button again to resume
playback.
Press
on the remote control or press and hold
on the front of your player to fast-forward on the disc. Each
time you press this button, the fast-forward speed changes
from 2 to 4 to 8 to 16 to 32 times the normal speed.
Press
on the remote control or press and hold
fast-reverse on the disc. Each time you press this button, the
fast-reverse speed changes from 2 to 4 to 8 to 16 to 32 times
the normal speed.
Press
(NEXT) to go to the next title, chapter, or track.
Press
(PREV) to go to the previous title, chapter, or track.
www.insigniaproducts.com
, your player starts playing
, your
(NEXT)
(PREV) to
13
Advertisement
Table of Contents
