Installation
Figure 5-18: Services and Rates for models RADWIN 2000 L and RADWIN 2000 PDH
For -
•
a collocated link
•
Models RADWIN 2000 L
proceed to
TDM Services
Otherwise, you can use the green slider to allocate asymmetric Ethernet capacity by changing
the Transmission Ratio between the sites.
For example: Suppose that during congestion, you might want to use 70% for the downlink
and 30% for the uplink. Your choice would typically be based on your experienced traffic load
during periods of congestion.
If you change the Transmission Ratio on a collocated link, you will offered the following warn-
ing:
RADWIN 2000 User Manual
and
RADWIN 2000 PDH
selection.
Release 2.6.40
Chapter 5
5-21