Table of Contents
Advertisement
DAILY USE
About 20 minutes after the programme start, the programme
duration could be adjusted again depending on the capacity of
water absorption of the fabrics.
The ProSense detection is carried out with complete washing
programmes only (no skipping phase selected).
The ProSense is not available with some programmes, such as
Wolle, programmes with short cycles and without washing
phase.
11.8 Programme phase indicators
When the programme starts the indicator of the running phase
flashes and the other phase indicators are steady on.
E.g. the washing or pre wash phase is running:
When the phase ends the relevant indicator stops flashing and is
steady on. The next phase indicator starts flashing.
E.g. the rinse phase is running:
During the washing cycle, the appliance mixes the detergent, the
stain removal for fabric treatment and/or the fabric softener with
water before introducing them into the drum; the indicator
appears and disappears on the display according to the different
programme phases (the arrows flash alternatively).
If you select the Plus Dampf the steam phase indicators come on.
The steam phase is running:
The anti-crease phase is running:
58/96
.
.
.
.
MIX
Advertisement
Table of Contents
