Table of Contents
Advertisement
L Programme phase indicator
By selecting the wash programme, the pilot
lights corresponding to the various phases
making up the programme come on.
After the machine has started, only the run-
ning phase pilot light stays on. When the
programme has finished, the END (PRO-
GRAM SONU) pilot light comes on.
M Programme selector
The selector is divided into 5 sectors:
• Cotton and linen (Beyazlar/Renkliler) (pro-
grammes A)
• Synthetics (Sentetikler) (programmes B)
• Delicate fabrics (Hassas Çamaçirlar) (pro-
grammes C)
• Wool (Yünlüler) (programme D)
• Special programmes (programmes F to L)
The selector knob can be turned either clockwise or anticlockwise.
Symbols on the programme selector
• Position E corresponds to the ECONOMY programme.
• The SOGUK position is for a wash with cold water.
Cancelling a programme
To cancel a programme which is running, turn the programme selector
knob to the CANCEL (IPTAL) position: three flashing dashes will be dis-
played.
Warning! After a programme which ends with water in the drum
(ANTICREASE option - SUDA BEKLETME), turn the selector knob first to
CANCEL (IPTAL) and then to the empty programme J.
Modification of a programme which is running
To modify a programme, first set the machine to PAUSE by pressing the
START/PAUSE (START ARA VERME) button.
Before the machine starts the heating phase, i.e. within the first 15
minutes for cotton programmes, 10 minutes for synthetic and delicate
programmes and 5 minutes for the wool programme, the selected wash
cycle can be modified.
Description of the appliance
ÖN YIKAMA
PREWASH
ANA YIKAMA
WASH
DURULAMA
RINSES
SUDA BEKLETME
RINSE HOLD
BOSALTMA
DRAIN
SIKMA
SPIN
PROGRAM SONU
END
IPTAL
L
K
J
H
A
G
F F
D
C
B
57
Advertisement
Table of Contents
