AEG LR85U844 User Manual
  1. Manuals
  2. Brands
  3. AEG Manuals
  4. Washer
  5. LR85U844
  6. User manual

AEG LR85U844 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
LR85U844
USER
MANUAL
EN
User Manual
Washing Machine

Advertisement

Table of Contents
loading

Related Manuals for AEG LR85U844

Summary of Contents for AEG LR85U844

  • Page 1 LR85U844 User Manual Washing Machine USER MANUAL...

  • Page 2: Table Of Contents

    17. ENVIRONMENTAL CONCERNS..............46 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.

  • Page 3: Safety Information

    ENGLISH SAFETY INFORMATION Before beginning the installation and use of this appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
  • Page 4 1.2 General Safety This appliance is for washing domestic-type, machine- • washable laundry only. This appliance is designed for single household • domestic use in an indoor environment. This appliance may be used in, offices, hotel guest • rooms, bed & breakfast guest rooms, farm guest houses and other similar accommodation where such use does not exceed (average) domestic usage levels.

  • Page 5: Safety Instructions

    ENGLISH approved by AEG (see more details in chapter "Accessories - Stacking kit"). 2. SAFETY INSTRUCTIONS 2.1 Installation 2.2 Electrical connection The installation must comply WARNING! with relevant national Risk of fire and electric regulations. shock. • Remove all the packaging and the •...
  • Page 6 • Do not use an extension hose if the has been discontinued: motor and inlet hose is too short. Contact the motor brushes, transmission between Authorised Service Centre for the motor and drum, pumps, shock replacement of the inlet hose.

  • Page 7: Product Description

    • The Oko-Mix technology has been • The AEG Steam Fragrance, thanks designed to protect the fabric fibres to the steam programmes offers the thanks to different pre-mixing phases...

  • Page 8: Technical Data

    Rating plate Mains cable Drain pump filter Transit bolts Feet for levelling the appliance Hose support Drain hose Inlet hose connection The rating plate reports the model name (A), product number (B), electrical ratings (C) and serial number (D).
  • Page 9 ENGLISH Make sure not to damage the hoses. 2. Remove the cardboard top and the polystyrene packaging materials. 7. Remove the polystyrene protection from the bottom. 3. Remove the internal film. 8. Pull up the appliance in vertical position. 4. Open the door and remove the polystyrene piece from the door seal and all the items from the drum.
  • Page 10 If you install the appliance on a plinth other units. that is not an accessory supplied by AEG, secure the appliance with the fixing 2. Loosen or tighten the feet to adjust the level.
  • Page 11 ENGLISH plates. This spare part is available in web Do not use an extension shop or from authorised dealer. hose if the inlet hose is too Read carefully the instructions supplied short. Contact the service with the accessory. centre for the replacement of the inlet hose.
  • Page 12 Make sure that the plastic guide cannot move when the appliance drains. 5. Without the plastic hose guide, to a sink spigot - Put the drain hose in the spigot and tighten it with a clamp. Refer to the illustration.

  • Page 13: Control Panel

    ENGLISH Connect the appliance to an earthed The power supply cable must be easily socket. accessible after installing the appliance. For any electrical work required to install this appliance, contact our Authorised Service Centre. The manufacturer does not accept any responsibility for damage or injury through failure to comply with the above safety precaution.
  • Page 14 6.2 Display Door locked indicator. Washing phase indicator. It flashes during pre-wash and wash phase. Rinsing phase indicator. It flashes during rinse phase. Spinning and draining phase indicator. It flashes during spin and drain phase. Steam phase indicator. Anti-crease phase indicator.

  • Page 15: Dial And Buttons

    ENGLISH The digital indicator can show: • Programme duration (e. g. The time shown when the programme is set could not correspond to effective duration and change af‐ ter ProSense phase. • Maximum load. • Finish in time (e. g. •...
  • Page 16 7.3 Introduction 7.6 Pods Touch this button to activate or The options/functions are deactivate the Pods option . not selectable with all washing programmes. When activated the relevant indicator is Check the compatibility between options/functions Follow the Pods manufacturer's dosage and washing programmes in and storage recommendations.
  • Page 17 ENGLISH 7.8 Extra Rinse This option is not available with a With this option you can add a few rinses temperature lower than to the selected washing programmes and 40 °C. optimise the fabric softener distribution • Prewash and improve the fabric softness. Use this option to add a prewash It is suggested when you use the fabric phase at 30 °C before the washing...

  • Page 18: Settings

    In some programmes the The rinses phase uses more water for rinses are performed with more water. some washing programmes The display shows the indicator The appliance empties the The door stays locked. The drum water out automatically after turns regularly to reduce creasing.

  • Page 19: Before First Use

    ENGLISH 8.5 Factory Defaults 2. Press and hold the Extra Rinse and Plus Steam buttons for some This function allows to restore the factory seconds. default options. To activate this option 3. After 3 seconds the total hours follow steps below: operated by the appliance are shown in the display: e.g.
  • Page 20 Washing programmes Programme Programme description Cotton and mixed synthetic fabrics. Ideal to wash your daily load in a short time, for a better clothes care and good cleaning PowerClean 59min already at 30°C. Low energy cycle for cottons. Decreases temperature and ex‐...
  • Page 21 ENGLISH Programme Programme description Do not use fabric softener and make sure that Outdoor there is no softener residue in the detergent dispenser. Outdoor clothing, technical, sport fabrics, waterproof and breathable jackets, shell jackets with a removable fleece or in‐ ner insulation.
  • Page 22 Programme temperature, maximum spin speed and maximum load Programme Default tempera‐ Reference spin Maximum load ture speed Temperature Spin speed range range 30 °C 1400 rpm 5.0 kg 60 °C - 30 °C 1400 rpm - 400 rpm PowerClean 59min 1400 rpm 8.0 kg...
  • Page 23 • Items that are not suitable for tumble drying. The fragrance dose bottles • Items with label "Dry clean only". are available on AEG web shop or by authorised After the steam treatment dealer. the laundry can be humid.
  • Page 24 10.4 Options compatibility with programmes Spin ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Rinse Hold ■ ■ ■ Extra Silent ■ No Spin ■ ■ ■ Stains ■...

  • Page 25: Daily Use

    ENGLISH Programme Universal Liquid Uni‐ Liquid for Delicates Special versal coloureds woollens powder Cottons ▲ ▲ ▲ Synthetics ▲ ▲ ▲ Delicates ▲ ▲ Wool ▲ ▲ 20min 3kg ▲ ▲ Outdoor ▲ ▲ Hygiene ▲ ▲ ▲ 1) At temperature higher than 60 °C the use of powder detergent is recommended. ▲...
  • Page 26 11.3 Filling the detergent and After a washing cycle, if additives necessary, remove any detergent residue from the detergent dispenser. Proceed as follows 1. Open the detergent dispenser. - Compartment for detergent pods (Max 2 pods). When using detergent tab‐...
  • Page 27 ENGLISH declared load for the set programme (only for a few seconds), the default temperature, the default spin speed and the washing phase indicators (when available). 2. To change the temperature and/or the spin speed, touch the related buttons. 3. If desired, set one or more options by touching the related buttons.
  • Page 28 To change or cancel this In case of in case of option: drum overload, the maximum declared load 1. Switch the appliance off by means of indicator comes on again the On/Off button. with the indicator 2. Switch the appliance on again.
  • Page 29 ENGLISH When the phase ends the relevant If the ProSense phase is indicator stops flashing and is steady on. already carried out and the The next phase indicator starts flashing. water filling is already started, the new programme E.g. the rinse phase is running: starts without repeating the ProSense phase.

  • Page 30: Hints And Tips

    In the display all washing phase 1. If necessary, touch the Spin button to indicators become steady and the time decrease the spin speed proposed by the appliance. area shows . 2. Touch the Start / Pause button: The indicator of the Start / Pause •...
  • Page 31 ENGLISH 12.1 The laundry load • Divide the laundry into: white, coloured, synthetics, delicates and wool. • Follow the washing instructions on the laundry care labels. • Do not wash white and coloured items together. • Some coloured items can discolour with the first wash.

  • Page 32: Care And Cleaning

    (60 °C max) for all types of fabric, • Normally soiled laundry may be or special ones for woollens only. washed without prewash in order to • The choice and quantity of detergent save detergent, water and time (the will depend on: type of fabric environment is protected too!).
  • Page 33 ENGLISH Regularly examine the drum to check for limescale. Clean drain pump Twice a year filter The regular detergents already contain water softening agents, but we Clean the inlet hose Twice a year recommend to run a cycle with empty and the valve filter drum and a descaling product occasionally.
  • Page 34 13.8 Cleaning the detergent Always obey the instructions dispenser that you find on the packaging of the product. To prevent possible deposits of dried detergent, clotted fabric softener, 13.7 Cleaning the drum formation of mould in the detergent dispenser, once in a while carry out the...
  • Page 35 ENGLISH CAUTION! Do not use sharp or metal brushes and sponges. CAUTION! Make sure that all detergent residue Press the bottom cover as is removed from the upper and lower indicated in the picture. part of the recess. Use a small brush Make sure that it is closed to clean the recess.
  • Page 36 2. Place a suitable bowl below the drain 13.9 Cleaning the drain pump pump access to collect the water that flows out. WARNING! 3. Open the chute downwards. Always Disconnect the mains plug keep a rag nearby to dry up any from the mains socket.
  • Page 37 ENGLISH 7. Turn the filter anti-clockwise to remove it. 12. Close the pump cover. 8. If it is necessary, remove fluff and objects from the filter recess. 9. Make sure that the impeller of the pump can rotate. If it does not rotate, contact the Authorised Service Centre.

  • Page 38: Troubleshooting

    13.11 Emergency drain 2. Remove the inlet hose from the appliance by loosening the ring nut. If the appliance cannot drain the water, carry out the same procedure, described in 'Cleaning the drain pump' paragraph. If necessary, clean the pump.
  • Page 39 ENGLISH 14.1 Alarm Codes and Possible failures The appliance does not start or it stops during operation. First try to find a solution to the problem (refer to the tables). WARNING! Deactivate the appliance before carrying out any check. With some problems, the display shows an alarm code and the Start / Pause button may flash continuously: If the appliance is overloaded, remove some items...
  • Page 40 • Make sure that the door is properly closed. The appliance door is open or not closed correctly. • The programme was not finished properly or the appliance stopped too early. Switch the appliance off and on again. Internal fail. No com‐...
  • Page 41 ENGLISH Problem Possible solution • Make sure that a washing programme that ends with water in tub, has not been selected. • Make sure that the washing programme is finished. • Set the drain or the spin programme if there is water in the You cannot open the drum.

  • Page 42: Consumption Values

    1. Press the On/Off button to switch the CAUTION! appliance off. Risk of burns! Make sure 2. Disconnect the mains plug from the that the water temperature mains socket. is not too high and the 3. Open the filter flap.
  • Page 43 ENGLISH Energy consumption. °C Temperature in the laundry. Litres Water consumption. Spin speed. Remaining moisture at the end of spinning phase. The higher is the spin speed, the higher is the noise and the lower is the remaining moisture. Values and programme duration may differ depending on different conditions (e.g.

  • Page 44: Quick Guide

    Programme Litres hh:mm °C Cottons 0.250 95.0 02:50 52.00 20.0 1400 20°C Synthetics 0.650 60.0 02:15 35.00 40.0 1200 40°C Delicates 0.400 55.0 01:10 35.00 30.0 1200 30°C Wool 0.200 55.0 01:10 30.00 30.0 1200 30°C 1) Maximum spin speed.
  • Page 45 ENGLISH 16.2 Cleaning the drain pump filter 180˚ Clean the filter regularly and, especially, if the alarm code appears on the display. 16.3 Programmes Programmes Load Product description Cotton and synthetic items. This programme 5.0 kg ensures a good washing performance in a PowerClean 59min short time.

  • Page 46: Environmental Concerns

    Programmes Load Product description All fabrics, except woollens and very delicate 8.0 kg fabrics. Programme for rinsing and spinning. Rinse To spin the laundry and to drain the water in 8.0 kg the drum. All fabrics, except woollens and del‐...
  • Page 48 www.aeg.com/shop...

Table of Contents