JVC NX-HD10 Service Manual page 13

Removing the CD mechanism assembly
Prior to performing the following procedure, remove
the top cover, the HDD board assembly, the front
panel assembly, the rear cover, the system control
board, the main amplifier board, the regulator board,
the fan assembly and the power transformer
assembly.
1. Remove the five screws V
mechanism cover.
2. Lift the front side of the CD mechanism cover to
disengage the joint e on the rear side of the CD
mechanism cover.
3. Remove the three screws W .
CD mechanism cover
(See Fig.25~28)
attaching the CD
V
Fig.26
V
AC jack board
CD mechanism cover
Fig.25
Fig.27
W
W
CD mechanism assembly
Fig.28
NX-HD10
Joint e
CD mechanism assembly
CD mechanism cover
V
W
1-13