Advertisement
Quick Links
Wireless Light Switch Kit
SKU: HRLS11D
[Instruction Manual]
Thank you for your purchase.
Please contact us if you have any questions.
We will get back to you within 24 hours.
Email: support@dewenwils.com
Please attach your Order ID so that
we can serve you better.
Advertisement
Related Manuals for Dewenwils HRLS11D
Summary of Contents for Dewenwils HRLS11D
- Page 1 Wireless Light Switch Kit SKU: HRLS11D [Instruction Manual] Thank you for your purchase. Please contact us if you have any questions. We will get back to you within 24 hours. Email: support@dewenwils.com Please attach your Order ID so that we can serve you better.
- Page 2 Warning: To reduce the risk of fire, electric shock, or personal injury, please strictly follow the instructions. 1. Indoor use only. Avoid high humidity, high temperature, and areas with a high magnetic field. 2. Always be sure to cut off the power before installing the receiver. 3.
-
Page 3: Power Input
Wiring Diagram Power Input N (Blue) Brown Brown N (Blue) G (Green) 1. Turn off the power to the main circuit breaker or fuse box working area before installation. 2. "L" Brown line is the hot wire."N"Blue line is the neutral wire. Do not connect the "L"... - Page 4 Operating Instructions 1. Remove the isolation tab in the battery compartment of the transmitter. 2. Press the ON/OFF button on the wall switch remote control to turn the receiver on and off. Note: 1. The program button of the receiver can also be used as a manual switch. 2.
- Page 5 1. Press the program button on the receiver for 6 seconds until the indicator light starts to flash rapidly. (Note: The light flashes from slowly to rapidly.) 2. Release the program button and then press it again. The indicator light will be off.
- Page 6 2. Release the program button and then press the “on” or “off ”button on the remote control. 3. Programming / paring is successful when the indicator light stops blinking. Note: Each set of ON or OFF button can be paired with and control several outlets; Each outlet can be paired and controlled by multiple transmitters.
- Page 7 3. Remove batteries if the remote is not in use for an extended period of time. Troubleshooting In the case that one receiver is unresponsive to the remote control, please follow the steps below to resolve the issue: 1. If the wire switch receiver is unresponsive to the remote control, please refer to the "Canceling Programming"...
- Page 8 One Year Limited Warranty DEWENWILS warrants this product to be free from defects in material and workmanship for a period of one year from the date of purchase. Warranty is void if damage is caused by misuse or improper installation.