Table of Contents
Advertisement
C
If you press On / Off button when the Child Lock is enabled, the programme will not be cancelled. You should cancel the
Child Lock first.
If you want to open the loading door after you have cancelled the programme but it is not possible to open the loading
door since the water level in the machine is above the loading door opening, then turn the Programme Selection knob to
Pump+Spin programme and discharge the water in the machine.
4.3.15 End of programme
End symbol appears on the display when the programme is completed.
If you do not press any button for 10 minutes, the machine will switch to OFF mode. Display and all indicators
are turned off.
Completed programme steps will be displayed if you press On / Off button.
4.3.16 Adjusting the VOLUME level
Low volume and high volume
Press and hold Auxiliary Function button 3 for 3 seconds to adjust the volume level. After the countdown as
"3-2-1" on the display is over, the volume level symbol will appear and the new volume level will be displayed.
4.3.17 Memory programme setting
You can create a Memory programme by saving frequently used programme and other settings. Use this
function when you want to select quickly the same settings you use for the laundry that you wash regularly.
Memory programme will remain at the factory set programme until you make a new Memory programme
setting.
To store a new Memory programme:
1 Select the desired programme, temperature, spin speed, soiling degree and auxiliary function.
2 Press and hold the Memory button for 3 seconds.
3 Countdown as "3-2-1" appears on the display.
to select a Memory programme:
1 Press Memory button. The "Memory " selection field will be activated on the display.
2 The programme saved as Memory and other settings will be displayed.
3 Press the Start / Pause button to start the Memory programme.
Washing Machine / User's Manual
51 / EN
Advertisement
Table of Contents
