Advertisement
7DEOH 6\VWHP 0HVVDJHV
0HVVDJH
Extended RAM
Failed at off-
set: nnnn
Failing Bits:
nnnn
Fixed Disk n
Failure
Fixed Disk Con-
troller Failure
Fixed Disk n
Identified
Incorrect Drive x
type - Run SETUP
Invalid NVRAM
media type
Invalid system
configuration
data
Keyboard control-
ler error
Keyboard error
Keyboard error nn
Mouse initialized
FRQWLQXHG
3UREDEOH &DXVHV
Extended memory not
working correctly or not
configured correctly at
offset nnnn .
nnnn is a map of the
bits at the RAM address
(in system, extended, or
shadow memory) that
failed memory test.
Each "1" in the map
indicates a failed bit.
Hard-disk drive speci-
fied by n not working or
not configured correctly.
System's automatic
drive-type detection fea-
ture identified hard-disk
drive(s).
Diskette drive x not cor-
rectly identified in
system setup program.
System having a prob-
lem accessing NVRAM
(CMOS).
System configuration
information in system
setup program is incor-
rect, or battery charge
may be low.
Keyboard controller
failed its test.
Keyboard not working
correctly.
BIOS detected a stuck
key represented by
scan code nn .
System's mouse found
and initialized.
Beep Codes and Error Messages
&RUUHFWLYH $FWLRQ
Enter system setup
program and restore
original value(s).
Enter system setup
program and restore
original value(s).
Ensure that drive is
installed correctly and
defined correctly in
system setup program.
No action necessary.
Ensure that drive is
defined correctly in
system setup program.
Set system configura-
tion jumper to
Maintenance mode;
reboot system to clear
all settings to their
defaults.
Enter system setup
program, and verify
system configuration
information; reboot
computer.
Enter system setup
program and restore
original value(s);
replace keyboard or
system board.
Replace keyboard or
system board.
Check keyboard; if a
key is stuck, pry it up.
No action necessary.
3-3
Advertisement
