Install Cord Hooks; Select Location; Install Exhaust Duct - Westinghouse WPAC8000 User Manual

INSTALLATION

INSTALL CORD HOOKS

Install the cord hooks at the back of the unit with 2 screws.
The top cord hooks should face upward, and the bottom
cord hooks should face downward.
cord hooks
screws

SELECT LOCATION

Use the following guidelines to select a location for the unit:
• The air conditioner must be operated within the
temperature range 61°F(16°C)-95°F(35°C).
• The appliance is for indoor use only.
• The appliance must be positioned so that the plug is
accessible.
• This air conditioner is intended for home use only.
• Do not operate the air conditioner in a humid
environment.
• Keep air inlet and air outlet clean and free of obstacles.
• Reserved space around the air conditioner: 30cm (12
inches)
8 | Westinghouse Outdoor Power Equipment

INSTALL EXHAUST DUCT

When installing, the exhaust duct should be as flat as
possible. Do not extend the duct or connect it with another
exhaust duct.
The length of the exhaust duct is less than 40 inches. Keep
the length as short as possible.
correct
wrong
1. Rotate exhaust connector and window clip clockwise
into the two ends of exhaust duct.
clockwise
Exhaust
Exhaust Duct
Connector
2. Insert exhaust connector into the groove of the exhaust
vent on the back of the unit until it clicks into place.
clasp
groove
under 51 inches
about 24 inches
clockwise
Window clip
Exhaust Vent