Install Batteries In Remote; Test Operation - Westinghouse WPAC8000 User Manual

INSTALLATION
3. Route drainage hose to drain.

INSTALL BATTERIES IN REMOTE

1. Press the back side of remote control and then push out
the cover of battery box along the arrow direction.
2. Insert two AAA 1.5V dry batteries.
3. Reinstall the cover of battery box.
Signal sender
Cover of battery box

TEST OPERATION

1. Plug in the power supply.
2. Press ON/OFF button on remote control to start the unit.
3. Press mode button to select auto, cooling, drying, fan
or heating function, and then check if the unit operates
normally.
Note: If ambient temperature is below 61°F(16°C), the unit
cannot operate in cooling mode.
12 | Westinghouse Outdoor Power Equipment
Battery
Reinstall
Remove