Westinghouse WPAC8000 User Manual page 10

INSTALLATION
4. Push the fixed base to the end of window panel.
5. Connect the rain guards to the Screen. Insert all three
projections on each rain guard into the holes in the
Screen. Side "A" will now be at the top, as indicated in
the diagram.
"A"
Projection
(Vertical sliding window) (Horizontal sliding window)
6. The window panel adapts to different window sizes that
open horizontally or vertically.
a. For the window is too narrow for direct installation,
the window panel needs to be cut down in size.
b. If the width of window is larger than the length of
window panel, please use the adjustment panel to
make sure you can span the entire length of your
window. Otherwise, you can add an extension
panel to prolong the length of the windows panel
assembly.
7. Push fixed base to the end of the window panel
assembly.
8. After the length is set, secure the panels with a fixed
clip and mounting plate. For certain windows, such as
a casement window, you will need to improvise several
steps of the installation.
Note: Insert the fixed clip into the groove of the adjustment
panel and screw down the mounting plates.
10 | Westinghouse Outdoor Power Equipment
Holes
Holes
"A"
Projection
Mounting plate
Mounting plate
9. Install the window panel into the window frame. Make
sure that the exhaust cover is attached to the window
panel.
10. Close the window sash securely against the window
panel.
Fixed clip
Fixed clip