E49-400T30S supports a maximum transmit power of 20dBm. Users can set lower output power to save power consumption. The module works in the 433MHz frequency band, with TTL level output, and is compatible with 3.3V IO port voltage.
Step Specific operation Connect the E49-400T30S module to the E49-TBL backplane, then plug it into the USB test board (E15-USB-T2), plug it into the computer, and make sure the driver has been installed correctly; Plug in the mode selection jumper cap on the USB test board (ie M1=0, M0=0), Select 5V (module supports 2.6~5.5V).