Ⅳ Recommended Wiring Diagram; Ⅴ Detailed Function; Module Reset - Ebyte E49-400T30D Specifications

Chengdu Ebyte Electronic Technology Co.,Ltd.
6 VCC
7 GND
8 Fixing hole
9 Fixing hole
10 Fixing hole
11 Fixing hole
Ⅳ Recommended wiring diagram
Serial A brief description of the connection between the module and the microcontroller (the above picture
Number
1 The wireless serial port module is TTL level, please connect with TTL level MCU.
Some 5V microcontrollers may need to add 4~10K pull-up resistors to the TXD and AUX pins of the
2
Ⅴ Detailed function

5.1 Module reset

After the module is powered on, AUX will output a low level immediately, perform hardware self-test, and set
the working mode according to user parameters. During this process, the AUX keeps the low level, and after the
completion, the AUX outputs the high level, and starts to work normally according to the working mode formed by
the combination of M1 and M0. Therefore, the user needs to wait for the rising edge of AUX as the starting point
Copyright ©2012–2019，Chengdu Ebyte Electronic Technology Co.,Ltd.
Input DC Module power positive reference, voltage range: 3.3 ~ 5.5V DC
Input Module ground
Fixing hole
Fixing hole
Fixing hole
Fixing hole
takes the STM8L microcontroller as an example)
module.
E49-400T30D Specifications
6