Advertisement
Quick Links
THANK YOU FOR PURCHASING YOUR 1 DOOR METAL LOCKER UNIT.
Please carefully read and follow these instructions to assemble your cabinet.
ENSURE PROTECTIVE EYEWEAR AND GLOVES ARE WORN WHEN ASSEMBLING THIS UNIT.
Step 1
FITTING SIDE
PANELS TO
BACK PANEL
A
Screw together
back panel and
left hand side
panel at locations
indicated by the
arrows.
1
JUN 2022
1 DOOR METAL
LOCKER UNIT
B
Screw together
back panel and
right hand side
panel at locations
indicated by the
arrows.
Step 2
FITTING FRONT
DOOR PANEL
TO SIDE PANELS
C
Slot front door panel into one
side then into the other.
Note: Ensure the front door
panel is flush with the side
panels. This is easier to do with
the doors open.
FOR INTERNAL USE ONLY
HT-6549
Top View
Bottom View
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Stratco HT-6549
Summary of Contents for Stratco HT-6549
- Page 1 1 DOOR METAL FOR INTERNAL USE ONLY LOCKER UNIT HT-6549 THANK YOU FOR PURCHASING YOUR 1 DOOR METAL LOCKER UNIT. Please carefully read and follow these instructions to assemble your cabinet. ENSURE PROTECTIVE EYEWEAR AND GLOVES ARE WORN WHEN ASSEMBLING THIS UNIT.
- Page 2 1 DOOR METAL FOR INTERNAL USE ONLY LOCKER UNIT HT-6549 Step 3 Slide the top panel inside the Screw the top panel to the cabinet and push up until inside of the cabinet as flush with the top of panels.
Need help?
Do you have a question about the HT-6549 and is the answer not in the manual?
Questions and answers