Radio Operations - Clarion DXZ578RUSB Owner's Manual

Radio Operations

Listening to the radio
1. Press the [SRC] button and select the radio
mode. The frequency or PS and PTY
appears in the display.
PS: Programme service name
PTY: Programme type
2. Press the [MENU] button and select the
radio band. Each time the button is pressed,
the radio reception band changes in the
following order:
FM1 FM2 FM3
FM1...
3. Push the [SEEK PANEL] leftward or
rightward to tune in the desired station.
Tuning
There are 3 types of tuning mode available,
seek tuning, manual tuning and preset tuning.
Seek tuning
There are 2 types of seek tuning: DX SEEK and
LOCAL SEEK.
DX SEEK can automatically tune in to
receivable broadcast stations; LOCAL SEEK
can tune in to only broadcast stations with a
good reception sensitivity.
1. Press the [MENU] button and select the
desired band (FM or AM (MW/LW)).
2. Tune into a station.
If "MANU" is lit in the display, press and hold
the [MENU] button for 1 second or longer.
"MANU" in the display goes off and seek
tuning is now available.
If "TA" is lit in the display, TP stations are
automatically sought.
DX SEEK
Push the [SEEK PANEL] leftward or rightward
to automatically seek a station.
When the [SEEK PANEL] is pushed rightward,
the station is sought in the direction of higher
frequencies; if the [SEEK PANEL] is pushed
leftward, the station is sought in the direction of
lower frequencies.
When seek tuning starts, "DX SEEK" appears in
the display.
AM (MW/LW)
LOCAL SEEK
If the [SEEK PANEL] is pushed leftward or
rightward and held in position for 1 second or
longer, local seek tuning will be enabled.
Broadcast stations with good reception
sensitivity are selected.
When local seeking starts, "LO SEEK" appears in
the display.
Manual tuning
There are 2 ways available: Quick tuning and
step tuning.
When you are in the step tuning mode, the
frequency changes one step at a time. In the
quick tuning mode, you can quickly tune the
desired frequency.
1. Press the [MENU] button and select the
desired band (FM or AM (MW/LW)).
If "MANU" is not lit in the display, press and
hold the [MENU] button for 1 second or
longer. "MANU" is lit in the display and manual
tuning is now available.
2. Tune into a station.
Quick tuning
Push the [SEEK PANEL] leftward or rightward
and hold in position for 1 second or longer to
tune in a station.
Step tuning
Push the [SEEK PANEL] leftward or rightward
to manually tune in a station.
If no operation is performed for more than 7
seconds, manual tuning is cancelled and the
display returns to the previous mode.
Recalling a preset station
A total of 24 preset positions (6-FM1, 6-FM2, 6-
FM3, 6-AM) exists to store individual radio
stations in memory. Pressing the [UP] or [DN]
button recalls the stored radio frequency
automatically.
1. Press the [MENU] button and select the
desired band (FM or AM (MW/LW)).
2. Press the [UP] or [DN] button to recall the
stored station.
15
DXZ578RUSB