Operations; Basic Operations - Clarion DXZ578RUSB Owner's Manual

5. OPERATIONS

Note:
• Be sure to read this chapter referring to the front diagrams of chapter "CONTROLS" on page ii (unfold).

Basic Operations

CAUTION
Be sure to lower the volume before
switching off the unit power or the ignition
key. The unit remembers its last volume
setting. If you switch the power off with the
volume up, when you switch the power back
on, the sudden loud volume may hurt your
hearing and damage the unit.
Turning on/off the power
Note:
• Be careful about using this unit for a long time
without running the engine. If you drain the car's
battery too far, you may not be able to start the
engine and this can reduce the service life of the
battery.
1. Press the [SRC] button.
The mode that was previous active is
displayed.
2. Press and hold the [SRC] button for 1
second or longer to turn off the power for the
unit.
Note:
• The first time this unit is turned on after the wire
connections are completed, it must be checked
what equipment is connected. When the power is
turned on, the "SYSTEM CHECK" appears in the
display. The system check starts within the unit.
When the system check is complete, the unit
returns to the radio mode.
Selecting a mode
1. Press the [SRC] button to change the
operation mode.
2. Each time you press the [SRC] button, the
operation mode changes in the following
order:
Radio (DAB) CD/MP3/WMA/AAC
USB (iPod BB)
changer) (TV)
External equipment not connected with
CeNET is not displayed.
(CD changer) (DVD
AUX Radio...
Adjusting the volume
1. Press the [+] or [–] button to adjust the
volume.
The volume level is from 0 (minimum) to 33
(maximum).
Switching the display
1. Press the [D] button to select the desired
display.
When CT data is not received, "CT– –:– –"
appears in the display.
11
DXZ578RUSB