Table of Contents
Advertisement
To access the Setup menu, press Ctrl-Scroll Lock on your keyboard
or Ctrl-minus (num). In the IBM 3151 emulation, Ctrl-minus (num) will
enter Setup mode. In the Scancode mode Ctrl-Scroll-Lock is always
the Setup key, even in the 3151 emulation.
Connection A: Host DCE
1.
Enter the Setup menu. If the EIA port is to be assigned to Session 2,
then switch sessions (Ctrl-Enter (num)). Remain in session 1, if it is to be
assigned to that session.
2.
In the Setup Quick (F1) menu, set the Host portion of the "Host/Printer"
selection to "EIA" without changing the current Printer option
("EIA/xxxx"). The Printer will be set in another connection procedure if
needed.
3.
In the Ports (F6) menu, set the proper communications settings for the
EIA Baud, EIA Data Format, EIA Parity Check, EIA Recv, and EIA Xmt
selections. See the Setup chapter for more information on the
individual settings.
Connection B: Host DTE
1.
Enter the Setup menu. If the Aux port is to be assigned to Session 2,
then switch sessions (Ctrl-Enter (num)). Remain in session 1, if it is to be
assigned to that session.
2.
In the Setup Quick (F1) menu, set the Host portion of the "Host/Printer"
selection to "Aux" without changing the current Printer option
("Aux/xxxx"). The Printer will be set in another connection procedure if
needed.
3.
In the Ports (F6) menu, set the proper communications settings for the
Aux Baud, Aux Data Format, Aux Parity Check, Aux Recv, and Aux
Xmt. See the Setup chapter for more information on the individual
settings.
Connection C: RS-232 with Modem
1.
Follow all procedures of Connection A, step 1 through step 3.
2.
If you are connecting to a modem, in the Ports (F6) menu, set the "EIA
Modem Control" parameter to "On".
Connection D: RS-232-C with Modem
1.
Follow all procedures of Connection B, step 1 through step 3.
2.
If you are connecting to a modem, in the Ports (F6) menu, set the "Aux
Modem Control" parameter to "On".
Connection E: Printer
1.
In the Setup Quick (F1) menu, set the Printer portion of the
"Host/Printer" selection to "EIA" without changing the current Host
19
Advertisement
Table of Contents
