Table of Contents
Advertisement
6) Right-click the page to exit.
Click Setting next to Schedule to configure the alarm schedule.
Step 4
Step 5
Configure the anti-dither period.
If multiple alarms occur during the anti-dither period, the system only record the event
once.
Step 6
Configure alarm linkage. For details, see Table 5-43.
Click Apply.
Step 7
5.10.5.2 Video Loss
When the video loss occurs, the system performs alarm linkage actions.
Step 1
Select Main Menu > ALARM > Video Detection > Video Loss.
Step 2
Select a channel and then click
Step 3
Click Setting next to Schedule to configure the alarm schedule.
Step 4
Configure alarm linkage. For details, see Table 5-43.
Step 5
Click Apply.
Figure 5-172 Video Loss
to enable the function.
260
User's Manual
Advertisement
Table of Contents
