Summary of Contents for JAR Systems ELEVATE MC-6 Series
Page 1
USB-C Charging Cart USB-C HYBRID MC-6XXX User Guide Version A #M00014 Last Modified August 2, 2022 For a copy of the most up-to-date manual, please contact JAR Systems or visit: Designed in the USA JAR-Systems.com/Support Made in China...
USB-C can be charged using USB-C emulator cables. charging port on the cart. Incorrectly connecting (Not Included, contact JAR Systems for more info) devices can strain the cable over long periods of time and lead to damage.
Trouble-Shooting Entire Charging Hub/Shelf Issue Lid Security Screws Always start troubleshooting with a simple reboot Check the back of the charging hub to see if the cart’s Unplug and replug the power cord. When the cart power cable is plugged in and connected correctly. is connected to power, the LEDs will change color based on the power draw of connected devices (see The easiest way to access the AC power cable is to...
Page 4
Installing Charging Cables and Adapters (For Hybrid Carts Only) 1: Remove the security screw using the provided Torx key (F6) from the center of the shelf and temporarily 2: Determine the length of cable that is needed to reach place it in the side of the cart to hold the tray open during the wiring process.
Page 5
In this case it may be best to arrange the majority of the adapters as far back in the tray as possible from left to right, flipping about half of them on their side. Please contact JAR Systems for additional assistance. EXAMPLE...
To the extent that the law permits, any liability which may be incurred as a result of the use or future use of a product manufactured or sold by JAR Systems is limited to the cost of repairing or replacing the failed product or component at the...