Intelligent Charging System
User Manual | PB-80C24H
Firmware | A 1.5
Introduction
The Intelligent Charging System uses power sensors and charging logic to deliver the fastest,
most efficient possible charge. The system automatically evaluates the power draw from each
charging outlet, directing power to the areas with the most demand first and charging as many
devices simultaneously as possible from a single 15A outlet.
Front
Power Icon
Charge Button
AUX Button
Charging Status Indicators
USB Port
Manage Button
Back
Power Connector
Auxiliary Outlet
Charging Outlets
Included
Quick Start Guide
LCD Display
Circuit Breaker
CHARGE MODE
Best used if all devices are powered
off and connected at the same time.
Power is discontinued when batteries
reach full charge to conserve energy.
NOTE: The charging system should always be in MANAGE MODE
in order to charge iPads and devices that remain in sleep mode.
To Begin Charging:
• Connect to Power
(AC 115V 60Hz)
• Select Charging Mode...
OR
MANAGE MODE
Best used if some of the devices are
left on or are returned to the cart at
different times. Charging continues
until it is manually stopped by pressing
manage again.
NOTE: if this mode is used frequently there
is a locked manage mode to keep the unit
in that mode for charging.