Related Manuals for Furniture of America CM-BK913QQ
Summary of Contents for Furniture of America CM-BK913QQ
- Page 5 Align the upper rear and front tubes (#9,10) to the holes along the upper headboards (#1,2), then insert the bolts (#F) into each hole. Secure using the Allen wrench (#H). Align the lower rear and front tubes (#11,12) to the holes along the lower headboards (#3), then insert the bolts (#F) into each hole.
- Page 6 Insert the connect tubes (#4) into the slots, then insert the bolts (#A) into each hole. Secure using the Allen wrench (#H). Insert the ends of the upper headboards into the tubes, then insert the bolts (#A) and secure using the Allen wrench (#H).
- Page 7 1. Align the ladder (#15) to the holes along the tubes, then insert the bolts (#D) into the top ends. Secure. 2. Align the bottom ends, then insert bolts (#E) and secure. 3. Align the front and back guardrails to the holes, then insert the bolts (#F) and secure. Align the bed frames (#7,8) to the holes indicated, then insert the bolts (#B) into each hole.
- Page 8 1. Align the middle tubes to the frames, then insert the bolts (#C) into the center holes. Secure using Allen wrench (#H). 2. Insert the bolts (#B) into each end of the middle tubes and secure. Align the support tubes (#14) to the bottom frames, then insert the bolts (#B) into the holes from above.
- Page 9 Separating the bunk beds:...
- Page 10 Place the caps (#G). Place the caps (#G) Align the support tubes to the top bed and secure.
Need help?
Do you have a question about the CM-BK913QQ and is the answer not in the manual?
Questions and answers