Advertisement
4
Slide JVC PnP all the way into the cradle so
that the connector at the bottom of the unit
makes proper contact in the cradle.
5
Press the
(POWER) button to turn on your
JVC PnP.
• If your JVC PnP has been properly connected
and the antenna is receiving the SIRIUS signal,
you will hear audio.
• If your JVC PnP has not been properly
connected, "Antenna Error" will appear on the
display of your JVC PnP.
Re-orient the antenna until you hear audio (refer
to "8 Antenna Aiming Options" on page 27 of
the KT-SR1000 Instructions).
– Make sure your car is not in garage, or
somewhere the satellite signal could be
blocked.
9
Advertisement
